企業為什么要制造手板？手板制造的意義是什么？

Why do enterprises manufacture handboards? What is the significance of handcraft manufacturing?

通常剛研發或設計完成的產品均需求做手板，手板是考證產品可行性的第 1步，是找出設計產品的缺陷、缺乏、弊端直接且有效的方式，從而對缺陷停止針對性的改善，直不能從個別手板樣中找出缺乏。此，通常還需求停止小量的試產進而找出批量里的缺乏以改善。設計完成產品普通不能做到很十全十美，以無法運用，直接消費一旦有缺陷將全部報廢，大大浪費人力和物力和時間;而手板普通狀況是少數的樣品，制造周期短，損耗人力物力少，很快地找出產品設計的缺乏進而改善，為產品定型量產提供充足的根據。

Usually, the products that have just been developed or designed need to be handmade, which is the first step to verify the feasibility of products. It is a direct and effective way to find out the defects, deficiencies and disadvantages of the designed products, so as to stop targeted improvement of defects, until the lack can not be found from individual samples. At this point, there is usually a need to stop a small amount of trial production, and then find out the lack of batch to improve. Generally, the finished products can not be perfect or even can not be used. Once there are defects in direct consumption, they will be scrapped, which greatly wastes manpower and material resources and time. However, the ordinary condition of handcraft is a small number of samples, with short manufacturing cycle and less labor and material resources. Therefore, it can quickly find out the lack of product design and improve it, so as to provide sufficient basis for product finalization and mass production.
                  

通俗點講，手板就是在沒有開模具的前提下，根據產品外觀圖紙或結構圖紙先做出的一個或幾個，用來檢查外觀或結構合理性的功能樣板。手板在不同的地方亦稱為首板。

Generally speaking, the hand board is one or several function templates which are made according to the product appearance drawing or structure drawing without opening the mold, which is used to check the rationality of appearance or structure. Hand board is also called headboard in different places.

簡單的說就是減少損失，當一個產品在設計完成之后快要投入生產時，產品的設計不可能是的，總會有些不足與漏洞，總要經過多次的改善才能保證產品的合格，那么如果產品設計完成就投入生產，在生產過程中就會有很多次品與報廢品，有致命缺陷的次品，也將成為報廢品，這對企業生一大損失的。手板制作就能夠大大降低減少此類事情的發生了。

In short, it is to reduce the loss. When a product is about to be put into production after the design is completed, the product design can not be perfect. There will always be some deficiencies and loopholes. The product must be improved many times to ensure that the product is qualified. If the product is put into production after the design is completed, there will be many defective products and rejected products in the production process, with fatal defects Products will also become waste products, which will cause a great loss to enterprises. Hand made can greatly reduce the occurrence of such things.