復模：即真空灌注，真空復模是使用原有的樣板，在真空狀態下制造出硅膠模具，并在真空狀態下選用PU資料進行澆注，然后克隆出與原樣板相同的，比原樣板耐高溫，強度和硬度都要好的復制造，假如客戶請求做幾套或幾十套時，適合用這種辦法，這么大大降低了成本。

Re molding: that is, vacuum pouring. Vacuum re molding is to use the original template to manufacture silica gel mold under vacuum, select Pu data for pouring under vacuum, and then clone the same as the original template, which is better than the original template in high temperature resistance, strength and hardness. This method is suitable if the customer requests to make several or dozens of sets, This greatly reduces the cost.

工藝處理：采用CNC、SLA、Complex三種方法制作的樣品進行采樣、拋光和組裝。這個程序是把所有零件制成一個產品。噴油：根據客戶的要求，在無塵室內環境中噴涂色彩，使手板樣品更加生動、華麗，增加手板樣品的真實感。絲網印刷：在我們手版的樣板平面上印刷或繪畫。印刷：印刷或畫在手板的不平整表面上。這一工藝要求在絲綢印刷的基礎上再加一塊板。

Process treatment: samples made by CNC, SLA and complex are sampled, polished and assembled. This procedure is to make all parts into one product. Fuel injection: according to the requirements of customers, spray colors in the dust-free indoor environment to make the hand board samples more vivid and gorgeous and increase the authenticity of the hand board samples. Screen printing: printing or painting on the sample plane of our hand plate. Printing: printing or painting on an uneven surface of a hand board. This process requires an additional plate on the basis of silk printing.

鐳雕刻：用激光去除商品外觀上的油漆，使部分方向透明。例如：手機鍵、汽車DVD鍵。透鏡等。

Radium carving: use laser to remove the paint on the appearance of goods to make some directions transparent. For example: mobile phone key, car DVD key. Lens, etc.

電鍍：對于一些更引人注目的產品，涂一層銀色的商業顏色，電鍍前的樣品需要非常潤滑。未發現任何雜質，然后浸入化學溶液中。過操作分為：水和真空。

Electroplating: for some more eye-catching products, apply a layer of silver commercial color, and the samples before electroplating need to be very lubricated. No impurities were found and immersed in a chemical solution. Over operation is divided into water and vacuum.

氧化：即陽極處理，使鋁的外觀發生氧化反應，形成膜，使物品不易劃傷。

Oxidation: that is, anodic treatment to oxidize the appearance of aluminum and form a film, so that the articles are not easy to scratch.

拉絲：拉出鋁材外表面的細小痕跡，使試樣感覺更好。

Wire drawing: pull out small traces on the outer surface of aluminum to make the sample feel better.

高光：對外部加工過的鋁樣品，加工一圈高速CNC，以揭示鋁的性質。

Highlight: for externally processed aluminum samples, process a circle of high-speed CNC to reveal the properties of aluminum.

UV上：在商品外表面噴灑一層透明的油，用紫外光干燥，使商品更亮、無花朵，如保護層。

UV: spray a layer of transparent oil on the outer surface of the commodity and dry it with ultraviolet light to make the commodity brighter and free of flowers, such as protective layer.

浮雕：在平面上，用手工雕刻一些標志或人物、動物、植物等功能。

Relief: on the plane, manually carve some signs or characters, animals, plants and other functions.

泥塑：一些斑點或文字、動物、植物等的外觀。是用紅泥雕刻的。車床：有一個夾頭可以容納各種數據，形成橢圓、圓杯等。

Clay sculpture: the appearance of some spots or words, animals, plants, etc. It was carved in red clay. Lathe: there is a chuck that can hold all kinds of data to form ellipses, round cups, etc.

磨光機：靠近CNC，但它是一個由手動和自動開關控制的拱型床。

Grinder: close to CNC, but it is an arch bed controlled by manual and automatic switches.

噴沙：在手板表面噴上一層沙子，使手板樣品看起來更、更。

Sand blasting: spray a layer of sand on the surface of the hand board to make the hand board sample look more and.

本文由濟南手板整理發布，您是不是對這些內容有所了解了呢?更多的內容請點擊：http://m.nicebrian.com我們會有更多精彩內容等你查看。

This article is compiled and released by Jinan Shouban. Do you know something about these contents? For more information, please click: http://m.nicebrian.com We will have more wonderful content for you to see.