手板加工制作期間如果不注重細節，就會導致手板的品質不合格，從而會使客戶退貨，這樣不僅浪費了時間，還要多出額外的很多方面的費用，實在是得不償失，因此手板加工制作要注意的細節要了解到才行！

　　If you don't pay attention to the details during the processing and production, it will lead to the quality of the hand is not qualified, which will make the customer return, so not only a waste of time, but also a lot of extra costs, it is more than worth the loss, so the details to pay attention to the processing and production of the hand to understand!

　　手板加工制作需要注意的地方還挺多的，有的手板如果太復雜的話，就需要拆件加工，這樣雖然會降低加工難度，但是也會導致它的強度沒有整件加工那么高；而整件加工雖然難，但是做出的手板強度高，承重能力也較強，只是所花的費用會高一些。

　　Hand processing and production need to pay attention to a lot of places, some hand if too complex, you need to disassembly processing, although this will reduce the difficulty of processing, but also lead to its strength is not so high as the whole processing; While the whole processing is difficult, but to make the hand strength is high, bearing capacity is strong, but the cost will be higher.

　　手板加工制作在噴油這個環節也需要注意，尤其是真空復模出來的手板，它的油漆附著力比較弱，如果不事先打上一層2K底漆，噴出來的油墨很容易脫落。有些廠家如果不注意這一點的話，做出的手板就會容易被客戶要求返工。

　　Hand processing and production in the oil spray this link also need to pay attention to, especially the vacuum mold out of the hand, its paint adhesion is weak, if you do not play a layer of 2K primer, spray out of the ink is easy to fall off. If some manufacturers do not pay attention to this point, the hand plate will be easy to be reworked by customers.

　　如果是一個比較成功的手板的話，不僅需要外觀漂亮和結構清晰，包括色彩的選擇方面，需要進行全盤的考慮。在進行加工的過程當中應該分析和權衡一下這個手板的使用期限，以及投入的平衡。因為對于公司來說，加工手板的投入往往都是納入到新品經營成本當中的，而這個問題就需要更多的去考慮。

　　If it is a more successful hand, not only need beautiful appearance and clear structure, including the choice of color, need to consider the whole. In the process of processing should be analyzed and weighed the use of the hand, as well as the balance of input. Because for the company, processing input is often included in the new product operating costs, and this problem needs more to consider.

　　在濟南手板加工的過程當中，一定要有一個更加合理的規劃。因為本身手板在加工的時候，就需要考慮到一些工作的人數和實際需要使用手板的工作人員。所以手板的數量一定是要合理的，這個時候建議是能夠與公司研發人員來進行協商工作，然后再去結合實際的情況來進行方案的設計。

　　In the process of processing jinan hand plate, there must be a more reasonable planning. Because the hand itself in the processing, you need to take into account the number of work and the actual need to use the hand staff. So the number of hand plate must be reasonable, this time the recommendation is to be able to negotiate with the company's RESEARCH and development personnel, and then combined with the actual situation to carry out the design of the scheme.

　　總而言之，濟南手板加工制作還有很多需要注意的地方，只有做好了這些方面，才能做出各方面都讓用戶滿意的手板產品，了解更多問題您可以來網站m.nicebrian.com咨詢看看。

　　In a word, Ji 'nan hand processing and production there are a lot of places to pay attention to, only to do these aspects, to make all aspects of the user satisfaction of hand products, to know more questions you can come to the website m.nicebrian.com consultation.